24V LPV Power Supply Hardwired
24V LPV Power Supply Hardwired
SKU:LPV-20-24
-Mean Well Power Supply 24V
-90~264VAC input
-Fully encapsulated with IP67 level
-Short circuit / Overload / Over voltage
-Constant voltage design (C.V. mode)
-Class 2 power unit / Pass LPS
-Isolation class II, no F.G.
-Withstand 300VAC surge input for 5 seconds
-Cooling by free air convection
-100% full load burn-in test
-Low cost, high reliability
-Suitable for LED-based decorative/architectural lighting, LED stage and theater lighting, and LED electronic displays
-2 years warranty
Materials and care
Materials and care
Materials and care
1. All TGTECH LEDS are tested and checked prior to dispatch, however always double check and test on site prior to installation.
2. LED ribbon is fragile, take care during transport and installation to avoid failure. If flexible LED ribbon not handled with care on installation the solder joints between sections can be compromised and cause immediate or prolonged failure.
3. Do not shake out the roll to straighten, bend excessively or stand on, long lengths should be handled by two persons while installing. Bending or shaping beyond format supplied is to be avoided at all times.
Note: once product has been secured using the supplied adhesive tape it cannot be removed without causing irreversible damage to the LED ribbon.
Do not remove protective backing until certain installation is final.
