LED ribbon Clips
LED ribbon Clips
SKU:O2P-8-S
LED ribbon clips
Corner clip 8mm and 10mm
Straight clip 8mm and 10mm
Tip using the 10mm in shallow track, diffuser will need to be cut back a little to make room for 10mm clips.
check lights are working after using clips.
Materials and care
Materials and care
Materials and care
1. All TGTECH LEDS are tested and checked prior to dispatch, however always double check and test on site prior to installation.
2. LED ribbon is fragile, take care during transport and installation to avoid failure. If flexible LED ribbon not handled with care on installation the solder joints between sections can be compromised and cause immediate or prolonged failure.
3. Do not shake out the roll to straighten, bend excessively or stand on, long lengths should be handled by two persons while installing. Bending or shaping beyond format supplied is to be avoided at all times.
Note: once product has been secured using the supplied adhesive tape it cannot be removed without causing irreversible damage to the LED ribbon.
Do not remove protective backing until certain installation is final.
